Full inspection of luggage

The inspection company classifies the bags into the following categories according to the inspection standards:

• Document packages to be inspected: folders, document bags, etc.
• Backpack inspection products: backpacks, shoulder bags, messenger bags, waist bags, etc.
• Handbag inspection: leather handbags, PU handbags, fabric handbags, etc.
• Household suitcase inspection: suitcases, clothing bags, sundries storage bags, cosmetic bags, laundry bags, etc.
• Wallets/ticket holders: wallets, business card holders, key holders, card holders, etc.
• Travel bags inspection: trolley cases, trolley bags, multi-functional travel bags, etc.
• Briefcase inspection: shoulder briefcases, hand-held briefcases, etc.

1. There is no obvious color difference in the leather; there is no bleaching or scratches; there is no oily hair or rusty hair on the leather surface; there is no big difference in the texture and color of the front and back panel leather;

2. The inner lining cardboard has no cracks; the thickness of the elastic glue is uniform, smooth, and has no bumps;

3. Requirements for accessories provided by customers:

• Hardware accessories will not be damaged by corrosion;
• The zipper fits well and is smooth and straight;
• For the mortise locks provided by customers, it should be ensured that the insertion and extraction of the key are not hindered, and the pull of the lock cylinder should be flexible and stable; - There should be an audible, tactile or obvious positioning point;
• It should be easy to change the number of the combination lock provided by the customer, and the dial should be light and free;
• All locks are covered with protective film;
• The resin sheet for mirror glass has good transparency, flatness, smoothness and no stains.

4. Fabric: Check whether the fabric is drawn, the thread is thick, there are bamboo knots, the fabric is cut, there are holes, whether there is a color difference between the front and back pockets, the left and right parts, the inner and outer bags do not match the color, and the color difference.

5. Sewing: The lines should be clear and straight, the stitch length should be even, there should be no missed stitches, floating threads, open threads, glue detachment, or exposed needle holes. The spacing between the double needle threads should be even, and there should be no interface on the large surface of the thread.

6. Diaphragm: The inner partition is flat, clean, without rubber particles, and the lining has no thread pattern. There are no defects that affect the appearance; the internal partition structure is inspected and accepted according to the model standard.

7. Velcro: Check the adhesion of the Velcro. The Velcro should not be exposed, that is, the upper and lower pieces of Velcro should fit together and should not be misaligned.

8. Nails: In order to support the entire bag, plastic plates or plastic rods are usually used to connect the fabric and fix it with nails. Check the 'reverse mouth' of the nails, also called the 'flower'. It should be round and smooth, without cracks, and without scratching your hands.

9. Check the silk screen or embroidery of the LOGO: The silk screen should be clear, the strokes should be even, and there should be no uneven thickness. Pay attention to the embroidery position, the thickness, curvature, bend, and color of the embroidered letters or patterns, and make sure they are in line with the signature board. Make sure the embroidery thread is not loose.

6. Trolley case - the box body is full and symmetrical, without squeezing, rounded corners, square corners, and stable on the ground. The flat clothes are not bent or wavy; the parts of the box body are symmetrically connected, and the flat clothes are not misplaced.

7. Wallet - The texture of the large leather of the wallet and the inner compartment (of the same leather) is slightly different; the edges are straight and the width is the same; the crimping line is straight and uninterrupted; the brand is clear; the internal grid card insertion position is standard for inserting credit cards, and the card slot is not tilted; the gap between the large side of the wallet and the middle compartment and the internal compartment should be at least 3mm to avoid deformation; the interior is flat and tidy.

According to the order quantity of luggage products, we determine the inspection time and the number of inspectors. We arrive at the factory at the time specified by the customer or the time when the factory completes the bulk of the goods to conduct luggage product inspection and quality inspection.

Generally, the factory provides the inspection site and conducts 100% inspection on luggage products according to the inspection standard operating instructions provided by the third-party inspection company or the customer.

The inspector conducts the first inspection of the finished bags according to the inspection requirements and instructions.

Good products are packed into boxes by factory personnel, and the inspection QC is responsible for supervising and confirming the packing process to prevent foreign matter or defective products from mixing in and confirming the packing method and quantity. The outer boxes of good products without problems are sealed and stamped with the QC seal.

Defective products are counted and classified according to defects, and then sent back for repair by factory staff. After the defect repair is completed, a second inspection is carried out until all shoes are 100% qualified.

Issue inspection reports. Any defects found during the inspection will be classified according to the description of the bag defects, recorded in the inspection report, and photographed. Feedback the inspection report to the production department and quality management department in a timely manner so that defects can be repaired in time and product quality can be improved.

• - Grease (stains)
• -Oil, ink, glue, bleach, chalk, motor oil or other stains
• - Any chemical residues from cleaning, dyeing or other processes
• - Any unpleasant odor

2. Failure to meet specified requirements

• - Any size that does not meet the requirements or exceeds the scope of the technology
• -Main materials, colors, accessories, and attachments are different from the samples
• - Substituted or missing parts
• - If the color is required to match the main material, all accessories or accessories that do not match the original fabric standard

3. Fabric defects

• -Broken hole
• - Potential defects that may cause holes in the fabric
• - Fabric wrinkles or thread pulling
• - Cotton weaving defects (such as rough yarn grain and drawn yarn, etc.)
• - Uneven dyeing, gluing, backing or other finishing
• - Fabric structure - feel or appearance does not match the approved sample

4. Cutting direction

• - All velvet leather materials must be cut according to the instructions
• - Any cotton material that involves cutting direction, such as corduroy, knitted material, sewing or woven patterned fabrics, must be cut according to GEMLINE's instructions.

5. Structural Errors

• - Bad stitching
• -Poor interface/mock
• - Accessories and decorations are defective
• -Pockets: Pockets are not parallel to the torso because they are crookedly installed; pocket size is wrong